Underbody Trim Assembly Overview

Underbody Trim Assembly Overview

• The illustration shows a left fender. The right fender is identical.






1 Underbody cover

• Removing:

- Remove the hex nuts - 2 -.

2 Bolt

• 12 bolts from below

• 1 bolt behind the wheel housing liner

• Tightening specification: 2 Nm

3 Expanding nut

• Quantity: 13

4 Hoist mount

5 Bolt

• Quantity: 1

• Tightening specification: 2 Nm

6 Cover

• For vehicle lift point