Front Bumper Cover, License Plate Holder

License Plate Holder

Remove






- Remove the clips - 2 - and remove the license plate holder - 1 - from the bumper cover.

Installing






With holes present

- Install the license plate holder - 1 - and press in the clips - 2 -.

With no holes present

• Drill 12 mm holes.

- Center the license plate holder - 1 - with respect to the company emblem.

- Set the drill stop depth to 12 mm and drill the necessary number of holes.

- Position the license plate holder - 1 - on the bumper cover - 3 - and push in the clips - 2 -.