Rear Lid VW Emblem

Rear Lid VW Emblem






Removing

- Before removal, heat the emblem - 1 - with the hot air gun (V.A.G 1416).

- Lift the emblem off of the rear lid.

- Remove any adhesive residue with adhesive remover (VAS 6349).

Installation

- Clean the adhesion surface thoroughly with adhesive remover D 002 000 10 immediately prior to adhesion.

• The adhesive surface must be free of dust, grease and adhesive residue.

- Remove protective foil.

- Place the emblem - 1 - with the centering pins - 2 - in the indentations - 3 - on the rear lid.

- Firmly press on the emblem.