Adjusting Buffer

Adjusting Buffer






Perform the following:

Removing

- To remove the adjustment buffer, turn the entire buffer - 1 - 90° to the left - arrow a -.

- Remove the buffer - 1 - from the rear lid - 2 - - arrow d -.

Installation

- Check the stop - 4 - for proper seating in the side panel - 3 -.

- For installation, insert the entire buffer - 1 - in the right bracket in the side panel - arrow c -.

- Screw in the buffer - 1 - 90° to the right - arrow b -.

- Adjust the adjustment buffer - 1 -. Refer to => [ Rear Lid Adjustment Buffer, Adjusting ] Rear Lid Adjustment Buffer, Adjusting