Luggage Compartment Lamp (W3)

Luggage Compartment Lamp (W3)

• There may be several luggage compartment lamps depending on the vehicle equipment level. Removal and installation is the same for all luggage compartment lamps and is only described for one of the lights.

Removal

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

- Turn off the ignition and all electric consumers and remove the key.

- Pry the luggage compartment lamp - 1 - out of the opening - arrow - in the side trim panel with a screwdriver.






- Disengage and disconnect the harness connector - arrow - and remove the luggage compartment lamp.






Installation

Install in reverse order of removal.