Rear Bumper Cover Substructure

Rear Bumper Cover Substructure

• Due to model variations, small deviations must be considered during removal and installation.






1 Side guide

• Left and right

2 Bolt

• For the lateral guide

• 6 pieces per side

• Tightening specification: 3 Nm

3 Expanding nut

• 5 per side for the lateral guide

• 2 per side for the angle bracket

• 4 for the lower retaining part

• 4 in the lower retaining part

• 3 for the center guide profile

4 Angle bracket

• Left and right

5 Bolt

• For the angle bracket

• 2 pieces per side

• Tightening specification: 3 Nm

6 Bolt

• For the lower retaining part

• Quantity: 4

• Tightening specification: 3 Nm

7 Lower retaining part

8 Bolt

• For the guide profile

• Quantity: 3

• Tightening specification: 3 Nm

9 Center guide