Driveshaft with Triple Roller Joint AAR3300i, 09M Automatic Transmission, 6-Speed, AWD Overview

Driveshaft with Triple Roller Joint AAR3300i, 09M Automatic Transmission, 6-Speed, AWD Overview






1 Outer CV joint

• Replace only as complete unit.

• Removing => [ Removing The Outer CV Joint ] Driveshaft with Triple Roller Joint AAR3300i, 09M Automatic Transmission, 6-Speed, AWD

• Installing: Drive onto shaft using plastic hammer until compressed circlip seats.

• Checking, refer to => [ Outer CV Joint, Checking ] Outer CV Joint, Checking

2 Bolt

• There are different versions.

• Allocation, refer to the Parts Catalog

• There are 2 types of twelve-point bolts, with and without ribs. Distinguishing characteristic => [ Differences between a twelve-point bolt with ribs and a twelve-point bolt without ribs ]

• When installing a twelve-point bolt, always check what type of twelve-point bolt is to be used.

• Use the correct tightening specification for the specific bolt.

• The tightening specification for a twelve-point bolt with ribs is 70 Nm + 90°. For loosening and tightening specifications, refer to => [ Twelve-Point Bolt with Ribs, Loosening and Tightening, Driveshaft Threaded Connection ] Twelve-Point Bolt with Ribs, Loosening and Tightening, Driveshaft Threaded Connection.

• The tightening specification for a twelve-point bolt without ribs is 200 Nm + 180°. For loosening and tightening specifications, refer to => [ Twelve-Point Bolt with Ribs, Loosening and Tightening, Driveshaft Threaded Connection ] Twelve-Point Bolt with Ribs, Loosening and Tightening, Driveshaft Threaded Connection.

• Always replace if removed.

3 Locking Ring

• Always replace if removed.

• Insert in shaft groove

4 Clamp

• Always replace if removed.

• Tensioning => [ Tensioning Clamp On Small Diameter ] Front Suspension

5 CV Boot

• Check for tears and scuffing

• Material: Hytrel (Polyelastomer)

6 Clamp

• Always replace if removed.

• Tensioning => [ Tensioning Clamp On Small Diameter ] Front Suspension

7 Driveshaft

8 Clamp

• Always replace if removed.

• Tensioning => [ Tensioning Clamp On Small Diameter ] Front Suspension

9 CV Boot for Triple Roller Joint

• Check for tears and scuffing

10 Clamp

• Always replace if removed.

• Tensioning => [ Tensioning Clamp On Small Diameter ] Front Suspension

11 Triple Roller Star with Rollers

The chamfer - arrow - points to drive axle splines.

12 Locking Ring

• Always replace if removed.

• Insert in shaft groove

13 Adapter

14 Joint

15 Cap

• Remove => [ Removing The Cap From The Triple Roller Joint ] Driveshaft with Triple Roller Joint AAR3300i, 09M Automatic Transmission, 6-Speed, AWD

• Installing => [ Mounting The Cap Onto The Triple Roller Joint ] Driveshaft with Triple Roller Joint AAR3300i, 09M Automatic Transmission, 6-Speed, AWD

Differences between a twelve-point bolt with ribs and a twelve-point bolt without ribs





The contact surfaces - arrow A - and - arrow B - are different on the two-point bolts.

I Twelve-Point Bolt with Ribs - arrow A -
II Twelve-Point Bolt without Ribs - arrow B -