Right Flange Shaft Seals

Right Flange Shaft Seals

=> [ Small Seal ]

=> [ Large Seal ]

Requirement:

The bevel box is removed. Refer to the following:

Tiguan, refer to => [ Bevel Box ] Removal and Replacement.

Special tools, testers and auxiliary items required

• Torque Wrench (40-200 Nm) (V.A.G 1332)

• Seal Puller (T10397)

• Seal Puller (T10398)

• Assembly Tool (T10399)

• Thrust Piece (T10400)

Small Seal

Removing

- Install the seal puller (T10397) into the seal - 2 -.






- Remove the seal.






• If the seal puller (T10397) falls out:

- Reinstall the seal puller (T10397) again and remove the seal.

Installing

- Install the assembly tool (T10399/1).






- Install the seal - 2 - on the assembly tool (T10399/1).

- Install the seal all the way using the assembly tool (T10399).






Large Seal

Removing

- Install the seal puller (T10398) using 100 Nm of force into the seal - 1 -.






- Remove the seal.






• If the seal puller (T10398) falls out:

- Install the seal puller (T10398) into the seal using 120 Nm of force.

- Remove the seal.

Installing

- Mount the seal - 1 - on the thrust piece (T10400).

The spring - arrow - points away from the thrust piece.






- Install the seal all the way.

- Turn the thrust piece inside the transmission before removing it.

- Install the bevel box. Refer to the following:

Tiguan, refer to => [ Bevel Box ] Removal and Replacement.

- Check the transmission fluid level and fill if necessary. Refer to => [ Transmission Fluid Level, Checking and Adding ] Transmission Fluid Level, Checking and Adding.