Metal Valve, Removing and Installing

Metal Valve, Removing and Installing

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

Perform the following:

Removing

- Tire Pressure Sensor , Removing => [ Tire Pressure Sensor, (Service Version) ] Tire Pressure Sensor, (Service Version)

- Remove the nut - 1 - from the metal valve.






- Counterhold - arrow - the metal valve using a retainer (for example 2 mm spiral bore) while doing so.

Installing

• Only apply the specified torque to tighten the nut for the metal valve. Tightening more is not permitted because it damages the seal.

- Tighten the nut - 1 - of the metal valve.






- Counterhold - arrow - the metal valve using a retainer (for example 2 mm spiral bore) while doing so.

- Tire Pressure Sensor , Installing => [ Tire Pressure Sensor, (Service Version) ] Tire Pressure Sensor, (Service Version).

Tightening Specifications