Overview, Tire Pressure And Metal Valve Sensor

Overview: Tire Pressure And Metal Valve Sensor






1 Valve cap

2 Nut

• Individual component of => [ (Item 7) Metal valve ]

• 4 Nm

3 Washer

• Individual component of => [ (Item 7) Metal valve ]

4 Disk wheel

5 Seal

• Individual component of => [ (Item 7) Metal valve ]

6 Valve core

• Replace at every tire change

• Never use brass valve inserts (corrosion!) Only use nickel valve inserts (silver).

7 Metal valve

• Supplied complete as a service part

• Removing and installing, refer to => [ Metal Valve, Removing and Installing ] Metal Valve, Removing and Installing

8 Bolt

• Individual component of => [ (Item 7) Metal valve ]

• 4 Nm

9 Tire Pressure Sensor

• Left Front Tire Pressure Monitoring Sensor (G222)

• Right Front Tire Pressure Monitoring Sensor (G223)

• Left Rear Tire Pressure Monitoring Sensor (G224)

• Right Rear Tire Pressure Monitoring Sensor (G225)

• Removing and Installing for Service, refer to => [ Tire Pressure Sensor, (Service Version) ] Tire Pressure Sensor, (Service Version)

• Removing and Installing for production, refer to => [ Tire Pressure Sensor, (Production Version) ] Tire Pressure Sensor, (Production Version)

• The tire pressure sensors expire after approximately 10 years.