Left Rear Level Control System Sensors (G76), AWD

Left Rear Level Control System Sensors (G76), AWD

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

• Left rear level control system sensor (G76) , adaptive chassis DCC, AWD, removing and installing => [ Left Rear Level Control System Sensor (G76), Adaptive Chassis DCC, AWD ] Left Rear Level Control System Sensor (G76), Adaptive Chassis DCC, AWD

Removing

- Disconnect the harness connector - 1 -.






- Remove the bolts - 2 - from the lower transverse link.

- Remove bolts - arrows - from the subframe.

- Remove Left Rear Level Control System Sensor (G76).

Installing

Install in reverse order of removal. Note the following:

The Left Rear Level Control System Sensor (G76) lever must point toward the outside of the vehicle.

- After replacing, perform a headlamp basic setting => Vehicle Diagnosis, Testing, and Information System VAS 5051 in "Guided Fault Finding" function

Tightening Specifications