Stabilizer Bar AWD

Overview: Stabilizer Bar AWD

The - arrow - points in driving direction.






1 Stabilizer Bar

• There are different suspension versions. Refer to => [ Vehicle Data Label ] Application and ID and to the vehicle data label.

• Removing and installing, refer to => [ Stabilizer Bar, AWD ] Stabilizer Bar, AWD

2 Rubber mount

• Replace mounts always on both sides of vehicle

3 Clamp

4 Internal Multi-Point Bolt

• 25 Nm + 90°

• M8 x 28

• Always replace if removed.

5 Wheel Bearing Housing

6 Nut

• 40 Nm

• M10 x 55

• Self-locking

• Always replace if removed.

7 Internal Multi-Point Bolt

• Always replace if removed.

8 Coupling Rod

• Connects stabilizer to trailing link/wheel bearing housing

9 Subframe