Glove Box Lamp Switch: Service and Repair

Glove Compartment Lamp Switch (E26)

The glove compartment lamp switch is located on the rear side of the glove compartment.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the glove compartment.

- Releases the tabs - arrows - and remove the glove compartment lamp switch - 1 -.






Installing

Installation is performed in the reverse order of removal. Note the following:

- Check the glove compartment switch function. The glove compartment lamp must not light up when the cover is closed.