Front Side Marker Lamp Bulb

Front Side Marker Lamp Bulb

• The front bumper cover does not need to be removed when removing or installing the front side marker lamps (M11).

• The illustrations show removing and installing the left side marker lamp. Removing and installing the right side marker lamp is identical.

Removing

- Remove the side marker lamp. Refer to => [ Front Side Marker Lamps ] Front Side Marker Lamps.

- Remove the glass base bulb - 2 - from the bulb socket - 1 - in - direction of arrow -.






Front side marker lamp bulb: Wedge-base bulb: 12V, W3W

Installing

Install in reverse order of removal. Note the following:

• When installing the bulb socket, pay attention to the housing; the openings under the rubber seal must align with the tabs on the housing.