Cornering Lamp Bulb

Cornering Lamp Bulb

• The following illustrations show changing the left cornering lamp bulb (L148).

• Removing and installing the right cornering lamp bulb (L149) is identical.

• For reasons of clarity, the headlamp is shown in the uninstalled state.

• It is not necessary to remove the headlamp in order to change the cornering lamp bulb.

Removing

- Remove the cap - 2 -.






- Turn the bulb socket - 1 - for the cornering lamp bulb all the way in - direction of arrow -.






- Remove the cornering lamp bulb carefully from the headlamp. Pay attention to the wires still connected.

- Remove the cornering lamp bulb - 1 - from the socket - 2 - in - direction of arrow -.






Cornering lamp bulb : H7 12V, 55W

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the lamp is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Install the bulb socket - 1 - with the cornering lamp bulb into the reflector.

- Position the metal tab on the bulb socket - 2 - on the right stop into the opening in the reflector - 3 -.






- Turn the bulb socket - 1 - forward in - direction of arrow - using light pressure so that the bulb socket locks in the reflector.

Make sure the cap fits correctly when installing it. It is destroyed by entry of water into headlamp.

- Install the cap.

- Check headlamp for functions.