Fog Lamp

Fog Lamp

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)

• The following illustrations depict removal and installation of left fog lamp. Removing and installing the right fog lamp is identical.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the trim - 1 - - arrows - from the bumper cover.






- Remove screw - arrow -.






- Remove the fog lamp housing - 1 - from the bumper cover. Pay attention to the wires still connected.

- Disconnect the connector - arrow -.






- Remove the fog lamp housing.

Installing

Install in reverse order of removal. Note the following:

- Tighten the threaded connection to the tightening specification given in the overview. Refer to => [ Fog Lamps Overview ] Fog Lamps Overview.

- Check headlamp for function.

- Check the headlamp adjustment and adjust if necessary.