Rear Interior and Reading Lights

Rear Interior and Reading Lights

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Open the tabs - arrows - using a (VAS 3409) or screwdriver and remove the interior- and reading lamp from the roof trim panel. Pay attention to the wires still connected.






- Disconnect the connector - arrow - and remove the interior- and reading lamp.






Installing

Install in reverse order of removal.