Headlamp Switch (E1)

Headlamp Switch (E1)

The switch is installed inside the instrument panel next to the driver door.

The following components are integrated in the headlamp switch:

• Fog Lamp Switch (E7)

• Rear Fog Lamp Switch (E18)

• Headlamp Switch Light (L9)

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Turn the rotating handle of the switch to position "0".

- Press the switch - arrow 1 - and turn it slightly to the right - arrow 2 -.






- Hold rotary handle in this position and remove switch on rotary handle from instrument cluster - arrow 3 -.

- Disconnect the connector - arrow -.






Installing

- Connect the connector to the headlamp switch.

- Hold switch firmly and press in rotary handle of headlamp switch - arrow 1 - and turn slightly toward right - arrow 2 -.






- Hold rotary handle in this position and insert switch into instrument cluster.

- Turn rotary handle to position "0", release and engage switch.