Procedures

Openings for Vanity Lamp and Screen Separator, Cutting in Headliner

If the headliner is being replaced, it may be necessary to cut openings in the new headliner.

- Attach the knife blade (58 mm) (V.A.G 1561/2) to the electric cutter (V.A.G 1561A).

- Use the old part as a template.

- Place the template on the material side of the new part and mark the cutting lines.

- Make the cuts in the material side with the electric cutter (V.A.G 1561A).

• A carpet knife can also be used as an alternative to the electric cutter (V.A.G 1561A).

- Install the "vanity lamp" and "screen separator" in the new part.