Rear Bumper Cover Parking Aid Sensor Bracket, Painting

Rear Bumper Cover Parking Aid Sensor Bracket, Painting

The sensor bracket must be painted to match the color of the bumper cover before installing. The following requirements must be observed when painting the sensor bracket to ensure the parking aid system will work correctly.

- Use isopropyl alcohol to degrease the sensor brackets in the area to be painted - 1 -.






- Paint the sensor mounts in the area to be painted - 1 - the same color as the bumper cover.

• Only paint the inside of the sensor mount in the indicated area. If this is not observed, it may lead to difficulty when assembling or malfunctions in the parking aid system.