Windshield Washer Fluid Reservoir Filler Tube

Windshield Washer Fluid Reservoir Filler Tube

Removing

- Remove bolt - 1 -.

- Remove the connecting pipe - 3 - from the filler tube - 2 - on the container.






- Unclip the filler tube - 2 - and remove it from the vehicle.

Installing

Installation is performed in the reverse order of removal. Note the following:

The casting mark on the bottom side of the filler tube must be inserted into the hole - arrow -.






Connecting tube - 1 - and filler tube - 2 - must be joined so that the guides - arrows - engage in each other.