Steering Gear Electro-Mechanical Steering Gear with Subframe Assembly Overview

Steering Gear Electro-Mechanical Steering Gear with Subframe Assembly Overview






1 Electric Wire

2 Universal Joint

3 Bolt

• M8 x 35

• 30 Nm

• Always replace if removed.

4 Bolt

• 6 Nm

• Self-tapping

5 Heat Shield

6 Power-assisted steering gear

• With Power Steering Control Module (J500)

• with Electromechanical Power Steering Motor (V187)

• With Engine Speed (RPM) Sensor (G28)

• with Steering Angle Sensor (G85)

• With Steering Torque Sensor (G269)

• Can be tested in Guided Fault Finding using the Vehicle diagnosis, testing and information system (VAS 5051B)

• Removing and Installing, refer to => [ Electro-Mechanical Steering Gear ] Electro-Mechanical Steering Gear

7 Left Wheel Bearing Housing

8 Nut

• M12 x 1.5

• 20 Nm + 90°

• Self-locking

• Always replace if removed.

9 Bolt

• 50 Nm + 90°

• Always replace if removed.

10 Subframe

11 Right Wheel Bearing Housing