Outer Three-Point Seat Belt

Outer Three-Point Seat Belt

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the bench seat. Refer to => [ Seat Bench/Single Seat ] Seat Bench/Single Seat.

- Remove the rear wheel housing trim. Refer to => [ Lower C-Pillar Trim ] Lower C-Pillar Trim.

- Remove the rear shelf. Refer to => [ Rear Shelf ] Rear Shelf.

- Remove the bolt - 2 - (40 Nm).

- Remove the belt end fitting - 3 - from the bracket tab - 1 -.






- Remove the bolt - 2 - (40 Nm).

- Loosen the retainer - 1 - of the rear wall upper section - 3 -.

- Remove the automatic belt retractor - 4 - from the rear panel in - direction of arrow -.






Installation

- Install in reverse order of removal.