Diagram 4/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface, Engine control module, Instrument cluster, Electronic power control malfunction indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil pressure switch Locations [1][2]Diagrams

J119 - Multifunction indicator

J285 - Instrument cluster control module Locations

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

J623 - Engine control module Locations

K - Instrument cluster Locations

K132 - Electronic power control malfunction indicator lamp

T1o - Single connector

T14 - 14-pin connector

T16 - 16-pin connector

T20 - 20-pin connector Locations

T32 - 32-pin connector Locations

T52c - 52-pin connector

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B713) - Diagnostic CAN bus high connection 1 (in main wiring harness)

(B714) - Diagnostic CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

Previous Diagram 4/21 (Tracks 267-280)

Next Diagram 4/23 (Tracks 295-308)