Center Mounted Brake Lamp: Description and Operation

High Mounted Brake Lamp (M25)

• If one of the LEDs in the high-mounted brake lamp is faulty:

• The individual LEDs in the high-mounted brake lamp are in groups of four and supplied electricity as a group.

• The high-mounted brake lamp is designed in such a way that it still meets legal requirements when one LED group fails.

• If another LED group fails, these legal requirements are no longer met.

• When one LED group fails, the intact LEDs are given a higher load, by which failure of other LED groups can be assumed in the near future.

• Replace the high-mounted brake lamp if more than four separate LEDs have burned out in the high-mounted brake lamp.