Center Vent

Center Vent

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

Removing

- With the (3409) release the retaining clips - arrows - for the vents in the center instrument panel - 2 - and remove them slightly from out the instrument panel - 1 -.

- Remove the center instrument panel vents - 2 - from the instrument panel. Disconnect the wiring harness from the Analog clock (Y) and from the Emergency flasher button (E229).






Installing

- Install in reverse order of removal.

• Check all fasteners for damage and replace them if necessary for installing.