Engine Accessory Bracket: Service and Repair

Accessory Bracket

Removing

- Remove the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove the generator.

- Remove the Air Conditioning (A/C) compressor.

- Remove the accessory bracket.

Installing






- Install the alignment bolts - 2 and 4 - hand tight.

- Install the bolts - 1, 3 and 5 - hand tight.

- Tighten all the bolts diagonally to specification.

• Tightening specification, refer to => [ Cylinder Block Overview, Belt Pulley Side ] Cylinder Block Overview, Belt Pulley Side.