Crankshaft Axial Clearance, Measuring

Crankshaft Axial Clearance, Measuring

Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Dial Gauge 0-10 mm (VAS 6079)

Test Sequence:






- Attach the dial gauge 0-10 mm (VAS 6079) together with the dial gauge holder (VW 387) to the cylinder block and set the indicator against the crankshaft counterweight.

- Push the crankshaft against the dial gauge by hand and set the dial gauge to "0".

- Move the crankshaft from the dial gauge and read the measurement.

Axial clearance:

New: 0.07 to 0.23 mm

Wear limit: 0.30 mm