Brake Cables on Parking Brake Lever

Brake Cables on Parking Brake Lever

Special tools, testers and auxiliary items required

• Ring spanner insert AF 21 (T10347)

Removing

- Release the parking brake.

• Parking brake lever in released position.

- Open the cover on the rear storage compartment inside the center console.

- Remove the liner from the storage compartment.

- Release the tabs - arrows - and open the service flap - 1 -.






- Loosen the adjusting screw => [ Adjusting Screw ] Parking Brake Gearshift Lever Adjustment using (T10347).






- Set the parking brake.

- Tighten the adjusting screw => [ Adjusting Screw ] Parking Brake Gearshift Lever Adjustment using (T10347).

- Release the parking brake.

- Disconnect the brake cable - 3 - from the compensator bracket on the quick adjustor - 2 -.

Installing:

Install in reverse order of removal. Note the following:

- Adjust parking brake. Refer to => [ Parking Brake Gearshift Lever Adjustment ] Parking Brake Gearshift Lever Adjustment and => [ Parking Brake, Adjusting ] Parking Brake, Adjusting.