Clutch Housing

Clutch Housing

Special tools, testers and auxiliary items required

• Slide Hammer-Complete Set (VW 771)

• Additional Part for VW 771 (VW 771/37)

• Spindle from Seal Installer Set - Rear Diff (3066)

• Thrust Piece (T10148)

Pulling out the Seal and Sleeve





The sleeve has a shoulder on the inside.

- Mount the additional part for VW 771 (VW 771/37) behind the shoulder inside the sleeve.

- Using force, push the additional part for VW 771 (VW 771/37) into the sleeve.

Installing the Seal and Sleeve





- Clean the seal seat inside the transmission.

- Attach the spindle - A - from the seal installer set - rear diff (3066) into the threaded piece on the differential.

- Turn the nut - B - and pull the seal with the sleeve all the way over the thrust piece (T10148).

• For disassembled transmissions, install the seal and sleeve all the way using the thrust piece (T10148).

Installing the Oil Guide to the Transmission





- Insert the oil guide - A - into the hole - arrow 1 - and groove - arrow 2 - at the same time.