Valve Body: Locations

Wire Routing, Connectors and Valve Body Bracket

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors

• Mark the solenoid valve and/or sensor and its connector before disconnecting them.






1 - Solenoid Valve 4 (N91)

2 - Solenoid Valve 6 (N93)

3 - Solenoid Valve 5 (N92)

4 - Solenoid Valve 9 (N282)

5 - Solenoid Valve 10 (N283)

6 - Solenoid Valve 3 (N90)

7 - Solenoid Valve 1 (N88)

8 - Solenoid Valve 2 (N89)

A - Transmission Output Speed Sensor (G195) connector

B - Transmission Input Speed sensor (G182) connector

Bracket for Connectors, Securing the Wires






1 - Transmission Output Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

2 - Transmission Input Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

3 - Transmission Fluid Temperature sensor (G93)

4 - Shift Lever

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

- Arrow

• The wires are attached here.