Fluid Filter - A/T: Service and Repair

Transmission Fluid Filter

Remove oil strainer.

- Remove the transmission pan. Refer to => [ Transmission Fluid Pan ] Service and Repair.

- Remove the filter bolts - arrows -.






- Remove the filter - A - from the valve body.

Installing

- Lightly coat the seal on the filter suction collar with Automatic Transmission Fluid (ATF).

- Replace the filter if the seals are loose or faulty.

- Install the filter - A - to the valve body and tighten the bolts - arrows -. For the correct tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.






- Install the oil pan. Refer to => [ Transmission Fluid Pan ] Service and Repair.

- Fill the ATF and check the level. Refer to => [ Automatic Transmission Fluid Level, Checking and Adding ] Automatic Transmission Fluid Level, Checking and Adding.