Muffler and Mounts Overview

Muffler and Mounts Overview






1 from the Exhaust Pipe with Catalytic Converter

2 Bolt

• 26 Nm

• Always replace.

• For attaching the fuel tank.

3 Suspended Mount

4 Bolt

• 23 Nm

5 Center Muffler

• Factory installed with the rear muffler as one unit. If repair is necessary, replace separately.

• Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Exhaust System, Installing.

• Separating the exhaust system. Refer to => [ Muffler ] Muffler.

6 Retaining Loop

• Replace if damaged.

7 Rear Muffler

• Original equipment as one unit with the center muffler. If repair is necessary, replace separately.

• Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Exhaust System, Installing.

• Separating the exhaust system. Refer to => [ Muffler ] Muffler.

8 Nut

• 23 Nm

9 Repair Clamp

• For individual replacement of the center and rear mufflers.

• Installed position, refer to => [ Muffler ] Muffler.

• Tighten the nuts evenly.

10 Suspended Mount

• Replace if damaged.

11 Bolt

• 23 Nm

12 Nut

• 20 Nm

13 Rear Tunnel Bridge

14 Front Muffler