Ribbed Belt and Accessory Drive Components Overview
Ribbed Belt and Accessory Drive Components Overview
1 Bolt
• 23 Nm
2 Power Steering Pump Pulley
3 Bolt
• 23 Nm
4 Power Steering Pump
5 Accessory Bracket
6 Bolt
• 25 Nm
7 Bolt
• 25 Nm
8 Generator
• To make it easier to position the generator, drive the threaded bushing for the generator bolt back slightly.
9 Bolt
• 25 Nm
10 Idler Pulley with Bracket
• For the Air Conditioning (A/C) compressor ribbed belt.
• Do not remove the idler pulley from the bracket.
11 Bolt
• 25 Nm
12 Bushing
• Quantity: 2
13 A/C Compressor
14 Stud Bolt
• 25 Nm
• For attaching the power steering line.
15 Bolt
• 25 Nm
16 Ribbed Belt, for the Generator, Power Steering Pump and Coolant Pump
• Ribbed belt routing, refer to => [ Ribbed Belt Routing ].
• Before removing, mark the rotation direction using chalk or a felt-tip marker.
When installing the ribbed belt, make sure it is routed in the right direction and that it is seated correctly on the pulleys and the tensioner.
• Check for wear.
• Do not kink.
• Removing and installing, refer to => [ Ribbed Belts ] Ribbed Belts.
17 Ribbed Belt, for the A/C Compressor
• Ribbed belt routing, refer to => [ Ribbed Belt Routing ].
• Before removing, mark the rotation direction using chalk or a felt-tip marker.
When installing the ribbed belt, make sure it is routed in the right direction and that it is seated correctly on the pulleys and the tensioner.
• Check for wear.
• Do not kink.
• Removing and installing, refer to => [ Ribbed Belts ] Ribbed Belts.
18 Vibration Damper
• Multiple versions.
• To remove and install, lock the crankshaft. Refer to => [ Crankshaft, Locking ] Procedures.
19 Bolt
• 50 Nm + 90° (1/4) additional turn.
• Always replace.
• Quantity: 5
• Only use a strength category 10.9 bolt.
20 Coolant Pump
• In the cylinder block.
• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump.
21 Belt Tensioner, for the A/C Compressor Ribbed Belt
• 35 Nm
• Do not remove the roller.
• Removing and installing, refer to => [ Ribbed Belt Tensioner, A/C Compressor Belt ] Ribbed Belt Tensioner, A/C Compressor Belt.
22 Belt Tensioner, for the Generator, Power Steering Pump and Coolant Pump Ribbed Belt
• 35 Nm
• Do not remove the roller.
• Removing and installing, refer to => [ Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt ] Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt.
23 Bolt
• 40 Nm + 90° (1/4) additional turn.
• Always replace.
24 Bolt
• 25 Nm
25 Bushing
• Quantity: 2
26 Engine Mount
Ribbed Belt Routing
1. Power steering pump pulley
2. Ribbed belt, for the generator, power steering pump and coolant pump
3. Generator pulley
4. Idler pulley
5. A/C compressor pulley
6. Ribbed belt, for the A/C compressor
7. Vibration damper
8. Belt tensioner, for the A/C compressor ribbed belt
9. Belt tensioner, for the generator, power steering pump and coolant pump ribbed belt
10. Coolant pump pulley