Gears, Shafts

Special Tools

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Thrust Disc (VW 412)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Arbor 50 mm Dia. (VW 432)

• Thrust Tube (VW 454)

• Locking Pin (30-505)

• Thrust Piece (40-105)

• Press Tube (2040)

• Punch (VW 408 A)

• Tube 60 mm Dia. (VW 415 A)

• Holding Fixture (VW 313)

• Thrust Pad (VW 512)

• Tube 42 mm Dia. (VW 516)

• Sleeve (VW 519)

• Slide Hammer-Complete Set (VW 771)

• Support Channels (VW 457)

• Thrust Tube (VW 455)

• Thrust Pad (VW 510)

• Thrust Pad (30-11)

• Tube (3296)

• Attachment to VAG 1582 (V.A.G 1582/4)

• Pulling Hook (T20143)






• Thrust Piece (T40008)






• Inductive Heat Unit (VAS 6414)






• - 1 - Kukko Extractor 30-37 mm (21/5)

• - 1 - Kukko Extractor 46-58 mm (21/7)

• - 1 - Bushing 26/30 mm (21/8)

• - 2 - Kukko Puller 65-160 mm (18/1)

• - 2 - Kukko Puller 80-210 mm (18/2)

• - 3 - Kukko Separating Tool 12-75 mm (17/1)

• - 3 - Kukko Separating Tool 22-115 mm (17/2)

• - 4 - Kukko Support (22/2)











Special tools, testers and auxiliary items required

• Transmission Support (VW 353)

• Dial Gauge Holder (VW 387)

• Punch (VW 407)

• Thrust Pad Con. 8/65 (VW 433)

• Installation Arbor (VW 792)

• Holding Fixture (VW 801)






Special tools, testers and auxiliary items required

• Sleeve (40-20)

• Sleeve (40-21)

• Thrust Plate (2050)

• Spacers (VW 540/1B)

• Tapered Roller Bearing Puller (V.A.G 1582)

• Grip (V.A.G 1582/7)