Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Adapter for VW 771 Slide Hammer (VW 771/40)

• Threaded Adapter from Kukko Support (22/1)

• Driving Sleeve (VW 244 B)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Tube 37 mm Dia. (VW 416 B)

• Guide Piece (VW 436 A)

• Guide Pin (VW 439)

• Holding Fixture (VW 801)

• Guide Piece (10-15)

• Thrust Pad (3124)

• Bearing Driver (3264)

• Subframe Support Assem. Device (3290)

• Drift (T10168)

• Thrust Piece (T10203)

• Triple Square Socket Driver (3357)






• Connecting Pin (T10027 A)






• Hose Clamp Pliers (V.A.G 1275)






• Sleeve (VW 423)






• Pulling Hook (T20143)






• Hose Clamps up to 25 mm Dia. (3094)






• Pin (3282/29)






• Adjustment Plate (3282/33)






• Transmission Support Jig (3336)






• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)






• Thrust Block (T10083)






• Drip Tray for VAS 6100 (VAS 6208)






• Trim Removal Wedge (3409)











Special tools, testers and auxiliary items required

• Engine Support Bridge (10-222 A)

• Transmission Support (3282)

• Engine-/Gearbox Jack (V.A.G 1383 A)

• Tensioning Strap (T10038)

• Engine Support Basic Set (T40091)

• Engine Support Supplement Set (T40093)






Special tools, testers and auxiliary items required

• Release Tool (T10236)

• Thrust Disc (VW 412)

• Assembly Tool (T10178)

• Adapter (10-222 A/25)

• Counter supports, for example, from Kukko series 16 (Qty: 2)

• Wedge (T10357)






Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Thrust Tube (VW 455) or Sleeve (3160)

• Slide Hammer-Complete Set (VW 771)

• - 1 - Kukko Puller 12-14.5 mm (21/1)

• - 1 - Kukko Extractor 14.5-18.5 mm (21/2)

• - 1 - Kukko Extractor 23.5-30 mm (21/4)

• - 3 - Kukko Separating Tool 5-60 mm (17/0)

• - 4 - Kukko Support (22/1)

• - 4 - Kukko Support (22/2)






Special tools, testers and auxiliary items required

• Bracket (30-211 A)

• Thrust Piece (T10143) or Press Tool for Shaft Piece (T10180)

• Drift (T10169) or (T10362)

• Thrust Piece (T40008)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Hot Air Blower (V.A.G 1416)