Gear Shift Unit Overview

Gear Shift Unit Overview






1 Bushing

• For the gear shift shaft.

• Removing and installing, see - item 16 - in the => [ Transmission Housing Overview ] Transmission Housing Overview

2 Gear Shift Unit

• Consisting of the gear shift shaft and the gear shift cover.

• The components cannot be separated from each other.

• Can be removed and installed with the transmission installed, see - item 15 - in the => [ Transmission Housing and Gear Shift Unit Overview ] Transmission Housing and Gear Shift Unit Overview.

3 O-ring

• Insert in the groove in the shift cover.

• Install using transmission fluid.

• Always replace.

4 Cap

• For transmission ventilation.

5 Bolt

• For the gear shift unit to the transmission housing.

• Tightening specification, see - item 16 - in the => [ Transmission Housing and Gear Shift Unit Overview ] Transmission Housing and Gear Shift Unit Overview.

• Always replace

6 Selector Shaft Seal

• Removing and installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal.