Transmission Housing Overview
Transmission Housing Overview
1 Transmission Housing
• When replacing: Adjust the output shafts and differential. Refer to => [ Adjustment Overview ] Adjustment Overview.
• Changes to the cover/input shaft mount area, see - item 4 - in the => [ Transmission Housing and Gear Shift Unit Overview ] Transmission Housing and Gear Shift Unit Overview.
• Refer to the Parts Catalog.
2 Sealing Cap
• Removing, refer to => [ Removing the sealing cap ] Transmission Housing.
• Installing, refer to => [ Installing the sealing cap ] Transmission Housing.
3 Drain Plug
• Tightening specification, refer to => [ Different Versions of the Oil Fill and Drain Plugs ] Service and Repair.
4 Seal
• Always replace, if equipped.
5 Fill Plug
• Tightening specification, refer to => [ Different Versions of the Oil Fill and Drain Plugs ] Service and Repair.
6 Locking Pin
• For adjusting the shift mechanism. Refer to => [ Selector Mechanism, Adjusting ] Adjustments.
• Can be replaced with the transmission assembled.
• Removing, refer to => [ Removing the locking pin for the gear shift shaft ] Transmission Housing.
• Installed position, refer to => [ Installed position: locking pin ] Transmission Housing.
• Installing, refer to => [ Drive the locking pin for the shift shaft in up to the tool stop ] Transmission Housing.
7 Bushing
• For the selector shafts.
• Removing, refer to => [ Removing the selector shaft bushing ] Transmission Housing.
• Installing, refer to => [ Installing the selector shaft bushing all the way in up to the tool stop ] Transmission Housing.
8 Retaining Sleeve
• Removing when the transmission is disassembled, refer to => [ Removing the retaining sleeve from the transmission housing ] Transmission Housing.
• Removing when the transmission is assembled, refer to => [ Removing the retaining sleeve on a assembled transmission using the ] Transmission Housing.
• Different retaining sleeves, refer to => [ Locking Sleeve Differentiation ] Transmission Housing.
• Installing a retaining sleeve with a shoulder, refer to => [ Drive in the locking sleeve with a shoulder as far as the stop on the tool ] Transmission Housing.
• Installing a retaining sleeve without a shoulder, refer to => [ Drive in the locking sleeve without a shoulder as far as the stop on the tool ] Transmission Housing.
9 Needle Sleeve
• For the reverse gear shaft.
• Always replace if removed.
• Removing, refer to => [ Removing the reverse gear shaft needle sleeve from the transmission housing ] Transmission Housing.
• Installing, refer to => [ Installing the needle sleeve into the transmission housing ] Transmission Housing.
10 Outer Race/Tapered Roller Bearing
• For the output shaft for 5th, 6th and reverse gears.
• Removing and installing, refer to => [ Output Shaft, 5th, 6th and Reverse Gears ] Output Shaft, 5th, 6th and Reverse Gears.
• When replacing: adjust the output shaft for 5th, 6th and reverse gear. Refer to => [ Output Shaft Adjusting, 5th, 6th and Reverse Gears ] Output Shaft Adjusting, 5th, 6th and Reverse Gears.
11 Adjusting Shim
• For the output shaft for 5th, 6th and reverse gears.
• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.
12 Outer Race/Tapered Roller Bearing
• For the output shaft for 1st to 4th gears.
• Removing and installing, refer to => [ Output Shaft, 1st to 4th Gears ] Output Shaft, 1st to 4th Gears.
• When replacing: adjust the output shaft for 1st to 4th gears. Refer to => [ Output Shaft Adjusting, 1st to 4th Gears ] Output Shaft Adjusting, 1st to 4th Gears.
13 Adjusting Shim
• For the output shaft for 1st to 4th gears.
• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.
14 Outer Race/Tapered Roller Bearing
• For the differential.
• Removing and installing, refer to => [ Differential ] Service and Repair.
• When replacing: adjusting the differential. Refer to => [ Differential, Adjusting ] Differential, Adjusting.
15 Adjusting Shim
• For the differential.
• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.
16 Bushing
• For the gear shift shaft.
• Removing, refer to => [ Removing the gear shift shaft bushing ] Transmission Housing.
• Installing, refer to => [ Installing the gear shift shaft bushing all the way in to the too stop ] Transmission Housing.
17 Sealing Cap
• Removing, refer to => [ Removing the sealing cap plug ] Transmission Housing.
• Installing, refer to => [ Installing the sealing cap ] Transmission Housing.
18 Seal
• For the left flange shaft.
• Removing and installing, refer to => [ Left Flange Shaft and Seal ] Left Flange Shaft and Seal.