Clutch: Application and ID

Clutch Manufacturers, Differentiating

Either a "Sachs" or a "LuK" clutch may be installed.

It is possible to tell which clutch the vehicle has with the transmission installed:

- Remove the noise insulation.

- Remove the noise insulation from the oil pan, if necessary.

There are some openings - arrows - between the engine - A - and the transmission - B - near the bottom of the oil pan.






- Check the outer contour of the flywheel through these openings.

- The outer contour of the flywheel can also be inspected by removing - arrows - the small cover plate - A -, if equipped.






Round outer contour - arrows - = a Sachs clutch - A -






- Clutch removing and installing. Refer to => [ Clutch, Sachs ] Clutch, Sachs.

- Clutch overview. Refer to => [ Clutch Overview, Sachs ] Clutch Overview, Sachs.

Squared outer contour - arrows 1 - and a circulated depression - arrow 2 - = a LuK clutch - B -.

or

Round outer contour - arrows 1 - and a circulated depression - arrow 2 - = a LuK clutch - B -.






- Clutch removing and installing. Refer to => [ Clutch, LuK ] Clutch, LuK.

- Clutch overview. Refer to => [ Clutch Overview, LuK ] Clutch Overview, LuK.