Steering Gear, Hydraulic Steering Gear

Steering Gear, Hydraulic Steering Gear

• Currently, there is no service work to be performed on hydraulic steering gear.






1 Right Tie Rod End

• Identified with "A"

• Removing and Installing

• Checking:

• Installation position

2 Nut

• 70 Nm

3 Clamp

4 Boot

• Must not be twisted after toe is adjusted

• To replace, remove steering gear

5 Clamp

• Replace

• Tensioning

6 Right tie rod

• 100 Nm

• Removing and Installing

• Is preset when supplied as replacement part

7 Power-assisted steering gear

• Allocation, refer to the Parts Catalog

• Removing and Installing

8 Left Tie Rod End

• Identified with "B"

• Removing and Installing

• Checking:

• Installation position