Illuminated Vanity Mirror Bulb

Illuminated Vanity Mirror Bulb

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

The bulbs for the front passenger vanity mirror lamp (W14) and driver vanity mirror lamp (W20) are installed inside the roof trim panel behind the sun visors and turn on and off when the vanity mirror trim is opened or closed.

Removing

- Turn off the ignition and all electric consumers and turn the key to the 0 position.

- Use the (3409) or a screwdriver to pry the lamp out of the roof trim panel.






- Disconnect the connector - arrow -.






- Remove the lamp.

Installing

Install in reverse order of removal.

Replacing the bulb

- Press the contact plate - 1 - in the - direction of the arrow - and remove the tubular bulb - 2 - from the lamp.






Tubular bulb: 12V, 5W

Installing

Install in reverse order of removal.