Front Interior Lamp (W1), With Sunroof

Front Interior Lamp (W1), With Sunroof

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

The front interior lamp consists of

• Front interior lamp (W1)

• Left center reading lamp (W39)

• Right center reading lamp (W40)

• Sunroof switch (E8)

Removing

- Pry off the trim - 1 -.






- Remove the screws - 1 -, open the tabs - arrows B - and remove the - front interior lamp - from the headliner as far as the wires will allow.






- Disconnect the connectors - 1 - and - 2 -.






Vehicles with a telephone microphone (R38)

- Disconnect the connector from the telephone microphone - 3 -.

Continued for all vehicles

- Remove the front interior lamp.

Installing

Install in reverse order of removal.