Center Mounted Brake Lamp: Service and Repair

High-Mounted Brake Lamp Bulb (M25)

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Disconnect the connector - 1 -.






- Remove the bolts - 3 -.

- Remove the high-mounted brake lamp bulb - 2 - downward.

Installing

Install in reverse order of removal. Note the following:

- Tighten the screws to 2 Nm.