Analog Clock (Y)

Analog Clock (Y)

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Pry the analog clock and emergency lamp switch (E3) - 1 - carefully out of the center vent using (3409).






- Disconnect the connectors.

- Open the tabs - arrows - and remove the analog clock from the trim in - direction of arrow -.






Installing

Install in reverse order of removal.