Door Lock Reminder Light: Service and Repair

Central Locking -SAFE- Indicator Lamp (K133)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( trim removal wedge (3409) , screwdriver) will be positioned using commercially available adhesive tape.

• The Central locking -SAFE- indicator lamp function can be checked with the driver door control module (J386) output diagnostic test mode.

Removing

- Remove the door trim panel.

- Press the tabs - arrows - and remove the central locking -SAFE- indicator lamp - 1 - from the door trim panel.






- Disconnect the connector - 1 - from the central locking -SAFE- indicator lamp - 2 -.






Installing

Install in reverse order of removal.