Muffler: Service and Repair

Muffler and Mounts Overview






1 Clamping Sleeve

• Installed position and tightening specification. Refer to => [ Clamping Sleeve Installed Position ] Procedures.

2 from the NOx Reduction Catalytic Converter

3 Bolts

• 25 Nm

4 Bracket

5 Suspended Mount

6 Rear Muffler

• Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Removal and Replacement.

• Separating the rear muffler, refer to => [ Separating the Rear Muffler ].

7 Clamping Sleeve

• Installed position and tightening specification, refer to => [ Clamping Sleeve Installed Position ] Procedures.

• For repairs

8 Bracket

9 Rear Subframe

Separating the Rear Muffler





- Cut the rear muffler on the mark - arrow 2 - at a right angle.

- Insert the clamping sleeve between the marks - arrows 1 and 3 -.