Diagram 5/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Cylinder 4 combustion chamber pressure sensor, Automatic glow time control module, Engine control module, Glow plug 4





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G680 - Cylinder 4 combustion chamber pressure sensor

J179 - Automatic glow time control module 2.0L CKRA (TDI) Component Overview [1][2]Diagrams

J623 - Engine control module Locations

Q13 - Glow plug 4

T4ce - 4-pin connector

T11a - 11-pin connector

T14 - 14-pin connector, near the battery

T60 - 60-pin connector Locations

T94 - 94-pin connector Locations

(132) - Ground connection 3 (in engine compartment wiring harness)

(376) - Ground connection 11 (in main wiring harness)

(492) - Sensor ground connection 2 (in fuel injection system wiring harness)

(655) - Ground connection on left headlamp Locations

(D128) - Connection 26 (in engine compartment wiring harness)

Previous Diagram 5/8 (Tracks 85-98)

Next Diagram 5/10 (Tracks 113-126)