Diagram 27/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heater/heat output switch, Rear window defogger button, Climatronic control module, A/C control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E9 - Fresh air blower switch

E16 - Heater/heat output switch

E230 - Rear window defogger button

J255 - Climatronic control module Locations

J301 - A/C control module Locations

T2v - Double connector

T5 - 5-pin connector

T10a - 10-pin connector, on the heating and A/C unit

T16 - 16-pin connector

T20c - 20-pin connector

V2 - Fresh air blower

(639) - Ground connection on left A-pillar Locations

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(L77) - Connection (in fresh air blower wiring harness)

* - Diagnostic connector

*2 - Only for vehicles with Climatronic

*3 - Only for vehicles with Climatic

Previous Diagram 27/7 (Tracks 71-84)