Sunroof Function

Sunroof Function

The sunroof only works when the ignition is switched on.

After the ignition is switched off, these functions are available until the driver or passenger door is opened.

The knob - 1 - opens the glass panel.






Opening the glass sunroof in the so-called comfort setting - 2 - prevents most driving noise which may occur when open completely.

The glass panel can be tilted and closed by pulling or pushing the rotary knob.

The sunroof is equipped with a closing force limiter in area of window. When an obstruction is met during the closing sequence, the roof opens again by itself.

There is also an emergency closing function. If there are problems closing the sunroof, it can be forced closed by pushing on the back end of the knob. The rotary knob must be in the "sunroof closed" position.

For the emergency close function, the closing force limit is deactivated.

The sunroof motor has overheat protection, which activates under different conditions. After the sunroof motor has cooled down, it can be operated again.

It is still possible to open and close the sunroof using a special wrench if there is an electrical malfunction. Remove the front interior lamp (W1).