Center Trim Panel

Center Trim Panel

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing

- Remove the instrument panel center trim - 1 - from the instrument panel using the trim removal wedge (3409).

- Remove the instrument panel center trim piece - 1 -. Disconnect the wiring harness from the front passenger airbag -disabled- indicator lamp (K145).






Installation

- Install in reverse order of removal. Note the following:

• Check all the fasteners for damage and replace if necessary.

- Insert the centering tab - 2 - on the instrument panel center trim piece - 1 - into the retainers. Start from the center inserting the tabs.

- Lock all the tabs into the retainers in the instrument panel.